|
Item
|
Description
|
|
Command Keypad
|
Up to three command keypads can be added to any Flagship Marine alarm system at one time.
Pictures of PK1 installation
Part # PK1 (Pre-wired with six feet of wire)
Part # PK1-20 (Pre-wired with 20 feet of wire)
|
|
Remote Control Keychain
|
The watertight RC2 remote control works with all FS301 series alarms. Up to ten code-hopping RC2s can be programmed to any alarm. Part # RC2
|
|
Remote Control Keychain
|
The watertight RC4 remote control works with the FS301DSP-Z and FS701DSP-2Z series of alarms. Up to sixteen code-hopping RC4s can be programmed to any alarm. Part # RC4
|
|
Remote Battery
|
Replacement battery for the RC2 remote control. Part # BA23
|
|
Driver Relay
|
The FS401 driver relay powers loads up to 20 amps @ 12Vdc, such as flashing lights, boarding lights, communicators and multiple sirens. Part # FS401
|
|
Mini-Strobe Light
|
The SL12-HR is a high reliability miniature red LED strobe light with a clear lens and three mounting tabs. Strobe is water tight, extremely briht and comes with stainless steel mounting hardware. Dimensions - 2.25" high and 2.5" wide. Part # SL12-HR
|
|
High Water Sensor
|
Rule Bilge Switch used to activate 24-Hour delayed zone in case of high water. Part # 35A
|
|
Marine Link
|
The Marine Link wireless transmitter can be used to wirelessly connect sensors that are next to impossible to hard-wire,
such as dock dis-connect, fly-bridge, rescue rafts and other onboard equipment that may be difficult to run a wire to.
Marine Link utilizes encoded pulse detection making it virtually impossible for sensors to be bypassed by shorting or cutting.
Marine Link Specifications:
- NEMA3 Weatherproof housing
- Vibration resistant
- Three year Lithium user replaceable AAA
batteries
- Instant of twenty second delay trigger
- Minimum transmitter range of one hudred
feet
- Ruggedized for high vibration boats
- Dimensions: 5" x 3" x 1.25"
Part # M-Link
|
|
System Instructions
|
Extra set of System Instructions for all Flagship Marine alarms. Part # INS01
|
|
Red LED
|
Sealed external red LED for visual status of all alarm systems. Part # LED-1S
|
|
Warning Decal
|
Weather resistant window mounted security system warning decal. One comes with all alarms system kits. Part # WD1
|
|
Smoke/Heat Detectors
|
The CST449 monitors both smoke and high temperatures exceeding 135F. The CST449 contains an internal siren and contacts to connect to all alarm emergency zones. Part # CST449
|
